Layout and throughput8 min read

Digital Twin vs CAD vs Simulation Software: Which Answers Which Question

DBR77 TeamPublished

CAD answers "does it fit, and how do we build it?". Simulation software answers "how will this flow behave over time?" for one study. A digital twin answers the same flow questions for your specific plant, again and again, because it is a base simulation model of that plant: each decision is tested as variants on a copy, and the base is updated when the plant actually changes. You need CAD for every physical change. You need simulation when the result depends on time and waiting. You need a twin when those decisions keep coming.

Three tools, three different questions

Most arguments about "do we need a digital twin if we already have CAD?" come from mixing up the questions each tool is built for.

QuestionCADSimulation studyDigital twin
Will the machine fit, with safe clearances?YesNoUses CAD geometry
Which of three layouts gives more output per day?NoYesYes
Where do parts wait, and for how long?NoYesYes
How many forklifts or autonomous carts does the flow need?NoYesYes
What happens after we move these machines next year?RedrawNew studyTest it as a variant of the same base model
How long does the work stay useful?Lifetime of the designOne decisionMany decisions over years

Read across the rows and the tools stop competing. CAD owns geometry. Simulation owns behavior over time. A twin is what simulation becomes when the model belongs to one plant and stays in use.

What CAD does well, and where it stops

CAD is the authority on dimensions, placement and engineering detail, and installation teams, safety officers and suppliers work from it. No digital twin replaces it.

CAD stops where time starts. In an illustrative case, a layout drawing shows that a forklift aisle is 3.5 meters wide. It does not show that two forklifts meet in that aisle forty times a shift and wait for each other. It shows where a buffer rack stands and says nothing about whether the rack is full by 10 a.m. A layout can be correct in CAD and still underperform once parts, people and vehicles move through it with real cycle times, transport and changeovers.

Most plants fill this gap with a spreadsheet of average cycle and transport times, and averages hide the effects that cost money: queues that form when orders compete for the same machine, or a forklift that is free on average and busy at the moment it is needed.

What simulation software adds

Simulation software, usually discrete event simulation, runs a flow through time. Every part, operator and vehicle moves through the model as on the floor, with cycle times, transport and rules that decide what happens next. You get output per shift, waiting time, utilization and queue length at every buffer.

This is the step from "looks right" to "runs right". The model uses fixed times, so the same input always gives the same result, and a difference between two layouts comes from the change, not from noise. Nominal times are enough to start. To see how sensitive a layout is, compare variants with different fixed assumptions, for example a slower cycle. We explain the difference in Averages vs simulation over time.

A simulation study is often done once: a consultant or an engineer builds a model, answers one question, and nobody touches the model again. For a single decision, that is fine.

What makes a simulation model a digital twin

A simulation model becomes a digital twin when three things are true:

  1. It represents one specific plant, current or planned, with its real layout, routings, resources and product mix.
  2. Its base model is updated when a change is actually made on the floor: new machines, new shifts, a new product. Testing a decision runs on variants and leaves the base as it is.
  3. It is reused for the next decision instead of being rebuilt from zero.

The ISO standard for manufacturing digital twins, ISO 23247, defines it as a "fit for purpose digital representation" of something with a physical presence or operation in manufacturing, "with synchronization between the element and its digital representation". Synchronization can be manual at first: the model owner updates the base model after each change on the floor, from new data or measurements. Live machine data, for example from DBR77 IIoT, is a later stage, when the model is used regularly and you want it to follow the plant; the first useful result does not depend on it. We explain what a twin contains in What a Digital Twin in Manufacturing Really Is.

See CAD and simulation working in one model

Send us the CAD layout you already have. We use it as the base of a model in DBR77 Digital Twin, add your routings and run the flow, so you see where parts start to wait.

Talk to an expert

How the three work together on a real project

A car lamp manufacturer in southern Poland, with 270 people on two shifts, added a new production hall. Machines had to be moved into it and capacity expanded without stopping production. The plant runs injection molding, painting, electroplating, assembly, labeling, quality control and packaging, so every move affected several flows at once.

DBR77 built a digital twin that included the new area, with material flows and processing times for each task. The team used process animations to test relocation options and to decide the order of the moves. Three findings show what each tool contributed:

  • The final machine layout differed from the initial assumption. The first layout was a sound drawing, and running the flow through it showed a better arrangement.
  • Extended transport routes were the main source of production losses. The drawing showed how long the routes were; the simulation showed how much output they cost.
  • The best relocation sequence let some processes run in parallel. Sequencing is a time question, and a drawing has no time axis.

Management reviewed the final design in VR, which helped them choose the sequence of transferred processes faster. CAD, simulation and 3D each covered a different part of the job.

On a typical layout project, CAD gives the hall and the first layout options. The digital twin uses the CAD layout as the base, places 3D models of the machines and stations on it, adds routings, cycle times, transport and the order mix, and compares variants on the same measures. CAD then details the chosen variant for installation, and after go-live the base model is updated to match the plant, ready for the next decision. For a structured way to compare variants, see How to Compare Layout Variants Without Guesswork.

Which one do you need now?

Start from the question on the table.

  • If the question is about fit, clearance or installation, CAD is enough.
  • If it is about output, waiting or vehicles and comes up once, a simulation study answers it.
  • If the same plant faces such questions several times a year (a layout change this year, a robot next year, a new product after that), build a digital twin and keep it.

Our summary of 2D CAD vs a dynamic digital twin works as a one-page handout for that meeting.

FAQ

Can a digital twin replace CAD?

No. CAD remains the record for geometry, installation and safety. A digital twin uses the CAD layout as the base for the model and adds behavior over time, which CAD does not have.

Is a 3D model with animation a simulation?

Not necessarily. An animation can follow a fixed script. A simulation calculates what happens based on cycle times, rules and demand, so the result changes when you change the inputs.

What is the difference between simulation software and a digital twin?

Simulation software is the engine. A digital twin is a simulation model of one specific plant. Each decision is tested as variants on a copy of it, and the base model is updated when the plant changes, so it is reused for many decisions.

Can we start with a simulation study and turn it into a twin later?

Yes, if the first model is built on your real plant data and someone owns it after the study. That ownership question decides whether the model lives on or ends in a folder.

Conclusion

Before the next sign-off, ask one question of the decision in front of you: does the answer depend on time and waiting? If it does, a CAD drawing cannot settle it, and it needs at least a simulation study. If you expect similar questions about the same plant next year, name an owner for the model now so the study can grow into a twin.

Not sure which tool your next project needs?

Describe the relocation, layout change or investment you have coming up. We will say plainly whether a drawing covers it or whether the flow needs to be simulated first.

Ask a question

Sources

Want to test a decision from your plant?

Describe the decision to a DBR77 expert and we will show how DBR77 Digital Twin compares the options on output, waiting time and transport load.

Talk to an expert

Questions

Have a question about this topic?

Tell us what it is about. We will reply within one business day.

We use your data only to answer your request. See our Privacy Policy.

Digital Twin newsletter

Short notes on testing layout and flow decisions on a model, and news from DBR77 Digital Twin. You can unsubscribe at any time.